Tips to Preparing Your Commercial Gas Grill for the Busy Season

The busy season is on its way, and your restaurant’s gas grill is about to get a whole lot more use. Though grilling is pretty simple, regular maintenance is key to ensuring your grill works properly for a long time to come. There are some steps you will need to take to prepare your grill. Keep reading to learn how to get your commercial gas grill ready for the season.

Start with a Safety Check

Before you do anything else, you will need to perform a basic safety check of your grill. This includes some of the following steps:

Thoroughly inspect the grill and keep your eye out for any debris or abnormalities that could be potentially hazardous.

You will need to examine for hose leaks, too. Make sure the hose is attached securely before you put on the gas for the first time. One way to check for leaks and loose connections is to rub soapy water on them.

Turn the gas on and inspect the connections. If you see bubbles form, it means that the hose is loose and will be to be tightened or replaced.

Clean the Grates on Your Commercial Grill

Once you guarantee the grill is safely set up and maintained, you can start cleaning it. The easiest way to clean the grates is as follows:

First, burn off all the leftover food and gunk. Turn on the heat and flip the grates to heat all sides. This will burn off the hardened debris and make it easier to clean.

Scrub off any tough residue using a stainless-steel brush.

After the grates cool down, take them out and wipe them off using warm water and soap.

Rinse them off and dry them completely before putting them back in the grill.

Once clean, it is most important to season the grates, especially cast-iron grates like used in our Champion Tuff grills.

Cleaning Grill Burners Properly

If your commercial grill has burners, you will need to clean them separately.

Start by removing the burner protectors and scraping off any stuck-on debris using a putty knife . Any leftover grime can be scrubbed with soapy water.

Next, wipe the burners side to side using the stainless-steel brush. This motion stops debris from falling into the hole of the burner.

Don’t forget to check the gas jets and ensure they are not clogged or rusted.

Wipe Off Your Grill’s Interior and Exterior

Now it’s time to give the interior and exterior of your grill one last wipe down.

Scrape the walls of the inside using a putty knife to get rid of any carbonized grease.

Depending on how dirty the interior is, you may need to use degreaser and water to thoroughly clean off the grime.

Wipe down the outside of the grill. If it is stainless steel, use a stainless cleaner and a soft sponge. For other finishes, you can just use warm water to clean it.

Don’t Clean Your Grill Every Day

You may be tempted to follow these cleaning steps daily. Surprisingly, cleaning your grill after every use can actually cause it to rust and wear down more quickly. When you finish grilling for the night, brush off any leftover debris. There’s no need to worry about leaving it spotless, however. When you start the grill the next day, you can brush off any excess buildup before you start grilling.

Start Fresh With a New Commercial Gas Grill

If you are looking for even more tips about proper grill maintenance, or if you’re in the market for a new commercial grill before the busy season officially kicks off, we have exactly what you need. Invest in a commercial gas grill that is durable, easy to clean, and cooks with precision. Check out the options we have online today.